New Wind
Apri Menu di Navigazione
New Wind
Apri Menu di Navigazione

Aquagel® is slow recovery pneumatic foam with the addition of 2% liquid polyurethane gel.

Gelliamo - Aquagel
TECHNICAL FEATURES UNI EN ISO EMA 40 S EMA 40 N
Density 845 43 Kg/m3 43 Kg/m3
Hardness 2439-Met A 1,3 Kpa 2,0 Kpa
Compression set 1856 < 5% < 5%
Elongation at break 1798 95% ≥ 140%
Tensile strenght 1798 65 kpa 80 kpa

REFRESHING EFFECT

LOW TEMPERATURE

PRESSURE RELIEF

Coolgel®, the breathable viscoelastic foam with 10% liquid gel incorporated in the mix, which exponentially increases the feeling of freshness of the material.

Gelliamo - Coolgel
TECHNICAL FEATURES UNI EN ISO VP 50
Density 845 50 Kg/m3
Hardness 2439-Met A 1,85 Kpa
Compression set 1856 < 5%
Elongation at break 1798 ≤ 120%
Tensile strenght 1798 60 kpa

Superficial marble effect.

SPECIAL HIGH-DENSITY VISCOELASTIC FOAM

New Wind Wind introduces Hydrogel®, the innovative gel that can be applied on every material without need of glue.

Gelliamo - Hydrogel
TECHNICAL FEATURES UNI EN ISO
Density 845 900 Kg/m3
Elongation at break 1798 > 250%
Tensile strenght 1798 85 kpa

Hydrogel® needs no additional film as it is perfectly stable and skin-tested. It can also be perforated to assure optimal breathability.

You can apply Hydrogel® on any of our materials.

With the addition of PCM (phase change material) to increase the performance of the gel. A more intense cooling for a longer time.

Smartgel® is the self-modeling silicone gel, soft at touch, comfortable, solid and liquid at the same time.

Gelliamo - Smartgel
TECHNICAL FEATURES UNI EN ISO
Density 845 1000 Kg/m3
Elongation at break 1798 600%

Thanks to its viscoelastic features and its high density, SMARTGEL® can modify its shape, in three dimensions, putting up the right resistance and supplying the best support during sleep.

Thanks to its high specific weight (almost the same as water), SMARTGEL® distributes body pressure as evenly as possible helping blood circulation.

Thanks to its very high density (1000 Kg/m3) SMARTGEL® absorbs heat in an excellent way during sleep.

Thanks to its high density, Biosgel® excels in reducing bedsores as it evenly distributes pressure.

Gelliamo - Biosgel
TECHNICAL FEATURES UNI EN ISO
Density 845 900 Kg/m3
Elongation at break 1798 > 600%
Tensile strenght 1798 85 kpa

Perfectly breathable thanks to the honeycomb structure.

Takes 2-3 hours to increase temperature of 1°C, after that span, it levels off at temperature about two degrees lower than bodys.

Perfectly absorbs pressure.

Hight resistance to abrasion, chemical agents, and UV rays.

Elongation is more than 600%.