MATERIALS
GELLIAMO
Foams and components based on GEL
Aquagel® is slow recovery pneumatic foam with the addition of 2% liquid polyurethane gel.
| TECHNICAL FEATURES | UNI EN ISO | EMA 40 S | EMA 40 N |
|---|---|---|---|
| Density | 845 | 43 Kg/m3 | 43 Kg/m3 |
| Hardness | 2439-Met A | 1,3 Kpa | 2,0 Kpa |
| Compression set | 1856 | < 5% | < 5% |
| Elongation at break | 1798 | 95% | ≥ 140% |
| Tensile strenght | 1798 | 65 kpa | 80 kpa |
REFRESHING EFFECT
LOW TEMPERATURE
PRESSURE RELIEF
Coolgel®, the breathable viscoelastic foam with 10% liquid gel incorporated in the mix, which exponentially increases the feeling of freshness of the material.
| TECHNICAL FEATURES | UNI EN ISO | VP 50 |
|---|---|---|
| Density | 845 | 50 Kg/m3 |
| Hardness | 2439-Met A | 1,85 Kpa |
| Compression set | 1856 | < 5% |
| Elongation at break | 1798 | ≤ 120% |
| Tensile strenght | 1798 | 60 kpa |
Superficial marble effect.
SPECIAL HIGH-DENSITY VISCOELASTIC FOAM
New Wind Wind introduces Hydrogel®, the innovative gel that can be applied on every material without need of glue.
| TECHNICAL FEATURES | UNI EN ISO | |
|---|---|---|
| Density | 845 | 900 Kg/m3 |
| Elongation at break | 1798 | > 250% |
| Tensile strenght | 1798 | 85 kpa |
Hydrogel® needs no additional film as it is perfectly stable and skin-tested. It can also be perforated to assure optimal breathability.
You can apply Hydrogel® on any of our materials.
With the addition of PCM (phase change material) to increase the performance of the gel. A more intense cooling for a longer time.
Smartgel® is the self-modeling silicone gel, soft at touch, comfortable, solid and liquid at the same time.
| TECHNICAL FEATURES | UNI EN ISO | |
|---|---|---|
| Density | 845 | 1000 Kg/m3 |
| Elongation at break | 1798 | 600% |
Thanks to its viscoelastic features and its high density, SMARTGEL® can modify its shape, in three dimensions, putting up the right resistance and supplying the best support during sleep.
Thanks to its high specific weight (almost the same as water), SMARTGEL® distributes body pressure as evenly as possible helping blood circulation.
Thanks to its very high density (1000 Kg/m3) SMARTGEL® absorbs heat in an excellent way during sleep.
Thanks to its high density, Biosgel® excels in reducing bedsores as it evenly distributes pressure.
| TECHNICAL FEATURES | UNI EN ISO | |
|---|---|---|
| Density | 845 | 900 Kg/m3 |
| Elongation at break | 1798 | > 600% |
| Tensile strenght | 1798 | 85 kpa |
Perfectly breathable thanks to the honeycomb structure.
Takes 2-3 hours to increase temperature of 1°C, after that span, it levels off at temperature about two degrees lower than bodys.
Perfectly absorbs pressure.
Hight resistance to abrasion, chemical agents, and UV rays.
Elongation is more than 600%.